That would concern me. The only thing I ever heated was some ip stuff just looking for anything to help before I got used to it. Even had some really high mg eq from prom an once. It was really dark and thick but never solid.Always heat even when gear looks good, but never had to for obvious problem. Wouldn't there be a risk that bad-looking stuff would be ok to inject with plenty of heat, but crash again in your 98.6 body temp?
Ok, SAD, not arguing for the sake of arguing, but for the sake of fact finding. Unless the house IS 98.6, or the surrounding area the pack travelled through is, then the crashed gear we see when we receive the pack is somewhere less than 98.6 We get it gtg again at a temperature above 98.6 by heating, and swirling. Once we've injected, the gear comes back down to 98.6, and probably swirled less unless we're doing crossfit 24/7. The question may be where is the cutoff point? If that gear looked bad at the lower temps, and you made it look good by heating at a higher temp, just what in-between temp can you get away with?
I'm wondering if the gear you successfully rescued turned out to be happy inside a 98.6 body, but that another compound, or another source's brewing methods, might not?
There are currently 0 members watching this topic