Homemade Carrier Oil solutions..

[prime]

yeah. I'm wondering if prefiltering the oil first would help with changing out the filter midway. Either way, it's still using two filters but I don't like having the filter start leaking at the joint about 30 or 40 mls into the final solution.

 

[Bionixx]

I don't have that kind of patients. I'll get the .22micron whatman bottle top filter and Brake line bleader. I'm over the jonny rigg days that ended when I some making bongs when I was 18yr.

 

[prime]

vacuum are the easiest but a little over kill if you are only making 50ml. anything over 50ml then definately go with that. The filters are like $12 a piece plus shipping. I will say that the bottles are very top heavy so be careful or you'll have 200ml of oil all over your table.

 

[Bionixx]

I was thinking 4-10ml 250mg/ml Test Enanthate, 6-10ml 100mg/ml Stanozolol, and 10-10ml 100mg/ml Test Prop. A total of 190ml. That will last alittle while.

 

[Zomb131]

50% Vegetable Oil + 50% EO = A water like consistency. Adding also 2% BA + 20% BB.

For filtering, get a ZapCap-CR w/ a glass flask. I've had oil as hot as 90 degrees C go through the filter. It was a beautiful sight seeing a constant stream of oil.

 

[Bionixx]

50% Vegetable Oil + 50% EO = A water like consistency. Adding also 2% BA + 20% BB.

For filtering, get a ZapCap-CR w/ a glass flask. I've had oil as hot as 90 degrees C go through the filter. It was a beautiful sight seeing a constant stream of oil.

Don't think I'll be using Vegetable oil but have heard good thing about Ethyl Oleate. I'll order the Whatman ZapCap and 1-150ml & 2-50ml Glass beakers. I'll use Safflower oil, 2%BA, 18%BB and heat just alittle before filtering at no more than 24 atm vacuum, then bake at 270'F for one hour. I feel confident with this.