Zomb131
MuscleHead
- Jan 31, 2011
- 1,125
- 264
So a week go I changed my breaks on my Nissan because when stopping I started to hear a grinding noise, metal on metal. This isn't my first, i've done it many times. When changing them, I checked out the rotors and everything seemed ok, no pits, dents, etc. Everything goes back on fine, but the right side where the grinding noise was happening starts again. I gave it 2 days and the noise persists. I then take everything apart on the right front break and lube the shit out of it; still the grinding happens. Today I bought some high performance rotors, installed everything fine, and took it for a test drive. GRINDING IS STILL HAPPENING! I'm at a complete lose of what it could be.
Car: Nissan Altima 2005, 102,000 miles.
Car: Nissan Altima 2005, 102,000 miles.