% ba?

[Harold]

Me again guys,
Hello,

I'm going to sterilize my GSO:
-Bake 1 hour in oven to 275°F
-Filter with .22 Whatman
-add 1% BA

And now if I make some 200ml 250mg Testo E with 2% BA (4ml) and 20% BB.

can I just add 1% Ba and not too as I have ever 1% BA in my GSO?

Because 1% BA in 200ml GSO is 2ml.
1% BA in TE is 2ml

So 4ml total BA.

 

[SHINE]

using a .22m heating isn't realy NECESSARY, just mix and filter everything. If you think you need to heat 250F 90 min is enuff to heat sterilize your finnished product.

Make sure you use a oven thermometer so you don't over heat.

 

[SFGiants]

No need to bake or sterilize the GSO just brew it up and filter it .22 and you are good.

Nobody bakes anymore that is old school thinking and people that that filter with .45 are lazy and at risk as it will not completely sterilize the brew

All that baking and stuff takeS way too mush time.

A .22 filter is a must to sterilize.

1. Add BA / BB
2. Add Powder and mix
3 Add oil
4. Brew
5. Filter
6. Put in sterile vials

Get a hand pump and hand pump filtering system to filter

To brew add water to a frying pan place beaker in it, when water is boiling turn down heat a tad

Keep it simple and don't complicate things

200ml 250mg Test E

118.5ml Oil
50g Powder
4ml BA 2%
40ml BB 20%

 

[Harold]

Thanks a lot SFgiants.:ChopperEmo:

 

[SFGiants]

Thanks a lot SFgiants.:ChopperEmo:

Your welcome but Flying Dragon is the one you wanna thank not for him to share his wealth of knowledge I wouldn't know these things and would still be breaking shit lol.

 

[Harold]

Is it good if I don't filter my GSO?
Because I'll filter it at the end of the process!

 

[big bx]

That's fine. I believe most do it that way.

 

[SFGiants]

That's fine. I believe most do it that way.

Correct,,,,,,,,

 

[Harold]

Please guys help me to choose a hand pump and hand pump filtering system to filter. I need 1 liter.
I think to this one or another same:

1000ml Nalgene Nylon Membrane Complete Filter - 0.2 pore size (Qty. 12) | Complete Filter Units | Disposable Vacuum Filters | Filtration | Med Lab Supply

But is it complete?
Or I need other items?

 

[tilltheend]

I would not bake that at all, 1 hour is a long time and is probably less sterile. If I was you I would get a frying pan with water and a beaker. Fill the pan with water and use a beaker to cook the oil for mixing. That way you can monitor the compound closer. You also won't be exposes the oil to food contamenants.