Sub Q, Oil Based Injections

[BLTC]

I guess I was a big unclear. I didn't mean to shoot 3cc's subQ just if a 25g was considered a slin pin.

 

[HisAngriness]

I guess I was a big unclear. I didn't mean to shoot 3cc's subQ just if a 25g was considered a slin pin.

Not sure if you're being serious or not but I'll bite.
A slin pin is an insulin syringe.
As in the needle and syringe come together.
Usually a 1cc syringe with a pre-attached small gauge needle.
You can use small gauge needles on a 3cc syringe but that wouldn't be considered a slin pin

 

[kid666]

I guess I was a big unclear. I didn't mean to shoot 3cc's subQ just if a 25g was considered a slin pin.

29 Gauge or 30 Gauge typically considered a slin pin but using a 25 gauge with a 5/8 needle essentially can provide the same results.

 

[Rider]

@MAYO I’ve never tried a Test shot subq, that’s an interesting thought. Have you given it a try yet?

I have done them with a slin pin IM with no issues. This works well with short esters. I’ve done this with Test Prop for delts and even pec shots. Heat up the oil a bit, and it’ll flow through nice and smooth.

 

[prime]

Just to add use 27g slins and not the 29 or 30g because they are much slower to load.

 

[BLTC]

Not sure if you're being serious or not but I'll bite.
A slin pin is an insulin syringe.
As in the needle and syringe come together.
Usually a 1cc syringe with a pre-attached small gauge needle.
You can use small gauge needles on a 3cc syringe but that wouldn't be considered a slin pin

Thx for the reply. I'm not bullshitting you...just that much of a newb. I'm researching pins now and was hoping to buy just one size that I could do subq/IM and maybe more than 1cc per shot....kind of a "do it all" type pin. I was thinking maybe a 25g 1" with a 3cc syringe. Sound reasonable?

 

[Rider]

Thx for the reply. I'm not bullshitting you...just that much of a newb. I'm researching pins now and was hoping to buy just one size that I could do subq/IM and maybe more than 1cc per shot....kind of a "do it all" type pin. I was thinking maybe a 25g 1" with a 3cc syringe. Sound reasonable?

No, that’s fine for an IM shot, but too much for a subq shot.

 

[ITAWOLF]

dont heat it up n u will push for days and prob get a bruise
now if i could only man up n try a JET GUN
3cc no prob lol

 

[Jin]

Just to add use 27g slins and not the 29 or 30g because they are much slower to load.

I always backload slin pins. No patience with babies or small gauge needle drawing.

 

[PillarofBalance]

Does anyone have any info on how this affects (if at all) absorption rates? I would give this a whirl with my trt but don't want to fuck up my nice steady levels I got going.

Might ask my Endo about it.

 

[BLTC]

No, that’s fine for an IM shot, but too much for a subq shot.

I would only do .5 cc for subq and >1cc for IM. Just wondering if a 25x1" would be a good option or maybe even a 27gX5/8?

 

[HisAngriness]

I would only do .5 cc for subq and >1cc for IM. Just wondering if a 25x1" would be a good option or maybe even a 27gX5/8?

I wouldn't use 25g for subQ. I use 25 for IM. Personally I wouldn't go any bigger than 27 for subQ, preferably 29 and no longer than 5/8"
Yes, you can use a longer needle and just not stick it all the way in but that's just too much effort imo when you can just use a 5/8" or 1/2"