Latest posts

Forum Statistics

Threads
27,576
Posts
541,624
Members
28,555
Latest Member
pbtom
What's New?

bicep pinning

big_paul_ski

big_paul_ski

MuscleHead
Dec 13, 2010
2,374
349
27g 1/2 good? i hope sp cuz thats what i ordered. when i tried my bicep with a 29g 1/2 slin pin it was too hard to push through. where i get my pins it went from 27g to 30g so i went with the 27s.
 
MAYO

MAYO

Bad Mother
Sep 27, 2010
2,159
675
Is it a 27g slin? I got 27g x 3cc and they are pretty slow to push, but 27g slins blow pretty qwik.
 
big_paul_ski

big_paul_ski

MuscleHead
Dec 13, 2010
2,374
349
Is it a 27g slin? I got 27g x 3cc and they are pretty slow to push, but 27g slins blow pretty qwik.

they are not the slins. just 27g x 3cc.
 
trentracks

trentracks

TID Board Of Directors
Apr 23, 2011
1,526
703
yup goes easy with a 1ml barrel cause it builds higher pressure,push the pin down in to the muscle deep and let the plastic shoulder dent into the muscle. Make sure the pin end is attached well to the barrel...........fixing one up now for myself for a chest poking
 
Last edited:
MAYO

MAYO

Bad Mother
Sep 27, 2010
2,159
675
What you gonna push BP? I push test thru the 3cc w/ no prob, had some thick EQ that gave me trouble though.
 
big_paul_ski

big_paul_ski

MuscleHead
Dec 13, 2010
2,374
349
yup goes easy with a 1ml barrel cause it builds higher pressure,push the pin down in to the muscle deep and let the plastic shoulder dent into the muscle. Make sure the pin end is attached well to the barre......l fixing one up now for myself for a chest poking

thanks for the advice bruther:)
 
ITAWOLF

ITAWOLF

VIP Member
Dec 9, 2010
1,283
674
heat ur gear up BP it does wonders
 
TerribleTowel

TerribleTowel

Senior Member
Mar 31, 2011
181
21
^^ Agreed.. makes a world of difference. I'm shooting test p and tren a right now. I've pushed both through 29g slin pins with no problems as long as I heat the oil up before I draw and pin. If I don't heat it up first, I can't draw from the vial whatsoever.
 
SAD

SAD

TID Board Of Directors
Feb 3, 2011
3,673
2,293
^^ Agreed.. makes a world of difference. I'm shooting test p and tren a right now. I've pushed both through 29g slin pins with no problems as long as I heat the oil up before I draw and pin. If I don't heat it up first, I can't draw from the vial whatsoever.

You're drawing with a 29g slin? Why not backload it? I know from drawing peptides through a slin that it dulls the tiny little needle tip with just one push through the rubber seal. I put a video up a little while ago on backloading, although I'm sure you know how. Just a thought.

http://www.theironden.com/anabolic-steroids/3466-how-video-backloading-slin-pins.html
 
S

soinkid

Senior Member
Mar 14, 2011
231
8
Ok...so ill b honest...I pin my biceps with the same size as every where else...23g x 1.....must b tough huh..lol. it doesn't hurt, only the first time
 
Who is viewing this thread?

There are currently 0 members watching this topic

Top