Same problem with dissolving Frag 176-191. Objective is to minimize the volume of the injection. I have upped the concentration of the Acetic Acid to 1% Acetic Acid Water from 0.6% . Used 1.25ml of 1% acetic Acid to reconstitute 5 mg Frag. Frag was initially cloudy, but cleared up. Get several small clear precipitates on the vial interior that look like water drops. Thinking about going to 2% Acetic Acid Water. Concerned about the maximum concentration of Acetic Acid that can be safely used. Replies appreciated.
I don't know about AOD 9604, but legit Frag 176-191 should easily dissolve with Bac at 5mg/2.5ml. Maybe check your source.
Why minimize the volume, when it's negligible at best?
The precipitates ( water drops ), or cloudiness in the vial are probably due to condensation. There's nothing you can do about that and it really doesn't matter. As long as the peptide isn't separating from the BA or AA there's no problem, so just shake the shit up and use it.
I've made AA at 0.6 over the yrs for use with IGF and others, and had isuues with skin ulcerations. I wouldn't even go up to 1%,