Easy slin pin fill

[HDH]

Hey guys/gals, this is going to be a simple thread on filling slin pins with oil. It doesn't matter if the oil is thick, thin, heated or not heated.

After you put the pin in the vial and push the air in with the plunger, pull the plunger almost all the way out until it locks. If you pull it out too far, you will lose the seal so make sure you stop or you will have to replunge.



After the plunger is locked, open up a drawer just a little, put it in and walk away.



If you have more than one.






Easy, easy.

 

[MAYO]

You pinning those IM or Sub-Q?

 

[Realize]

and it'll fill its self?

 

[HDH]

You pinning those IM or Sub-Q?

I do subq. I'm getting ready to start a primo cycle and we were having a slin pin discussion on another board. I started a thread on filling the pins then just put it up on a few boards.

 

[HDH]

and it'll fill its self?

Yes sir, when you pull the plunger back up while it's in the bottle, make sure it locks so it creates suction. Not really different from filling normally only you don't have to hold the plunger to keep it from going back in the syringe and you can set it down and not have to stare at it while it fills.

 

[PillarofBalance]

Holy shit HDH you are a fuckin genius. Backloading always creeped me out but I did it anyway. This is much easier.

 

[Ogre717]

Does everyone just use slin pins for everything now? New concept to me. I feel like I have a lot of leaning out to do before that's a viable option

 

[Ztinman]

I just back fill them

 

[Lizard King]

Holy shit HDH you are a fuckin genius. Backloading always creeped me out but I did it anyway. This is much easier.

Why did back loading creep you out or should I be afraid to ask? Is it a ginger thing??

 

[FlyingDragon]

On a new vial, the suction will fill up the slin pin with little effort.....(waiting for some suction jokes)

 

[HDH]

Holy shit HDH you are a fuckin genius. Backloading always creeped me out but I did it anyway. This is much easier.

I was sitting on the bed filling a couple slins one day and just happened to be next to the dresser

 

[HDH]

Does everyone just use slin pins for everything now? New concept to me. I feel like I have a lot of leaning out to do before that's a viable option

I pretty much do. That's all I have at the house. I don't run large amounts anymore and I have a short ester cycle coming up but it will only be 12 pins a week. 12 pins a week with a slin is like nothing. Many injection sites.